Trenching and Digging

Compaction

13-0413-08
  • 3300# Plate Compactor
  • 19.7" Plate
  • 5.5 hp Honda Engine
  • Works for sand, clay, stone, and asphalt up to 3" per pass
  • 207 lb
  • 3300# Rammer
  • 13" Shoe
  • 2.8 hp Honda Engine
  • 150 lb



13-1513-52
  • 7850# Plate Compactor
  • 8.5 hp Honda Engine
  • Works for sand or clay up to 18" per pass
  • 529 lb
  • Tandem Vibratory Roller
  • 18 HP Honda Engine
  • 40 gallon water tank
  • 3000 lb centrifugal force
  • 2400 lb



13-90
  • 8" x 8" Hand Tamp



Hole Digging

26-0126-02
  • One person auger
  • 9 hp engine
  • 110 rpm max
  • Choice of 6", 8", or 12" bit (charge for additional bits)
  • 2" ball hitch
  • Two person auger
  • 5.5 hp engine
  • 190 ft-lb torque
  • Choice of 6", 8", or 12" bit (charge for additional bits)



26-0326-09
  • One person auger
  • 1.9 bhp 2-cycle engine (50:1)
  • 200 rpm / 60 ft-lb torque
  • Choice of 4", 6", or 8" bit (charge for additional bits)
  • Includes 18" extension and 50:1 mix
  • Manual post-hole digger




Trenching

SAFETY TIP: Start your trenching project the right way.  Call 811 at least 3 working days before digging to have your local utilities mark buried lines.

06-001(1)
06-001(1)
  • 4" x 24" Trench
  • Walk-behind
  • 11 hp Honda Engine
  • Straight line trench only
  • 780 lb
  • 6" x 30" Trench
  • Walk-behind
  • 11 hp Honda Engine
  • Straight line trench only
  • 780 lb



06-02_Track06-05-2
  • 6" x 36" Trench
  • Walk-behind
  • 20 hp Kawasaki gas engine
  • 1200 lb
  • 6" x 48" Trench
  • Walk-behind
  • 26hp Kawasaki gas engine
  • 1250 lb



06-0806-15
  • 8" x 48" Trench
  • Ride-on
  • 35 hp Diesel Engine
  • 4200 lb
  • Frost chain available
  • 1/2" x 4" Cable layer
  • Honda engine
  • Must be pulled backward
  • Ideal for laying dog fencing, low voltage cable, or SDI
  • 135-150 lb depending on model



06-20
  • 2" x 8" Trench
  • 3.5 hp Honda engine
  • Ideal for laying underground cables or sprinkler systems
  • 140 lb
  • Unit must be pushed - not self propelled



Excavators

32-79E140
  • 19,000# Excavator
  • Rubber Tracks
  • Two modes of control available: ISO (Deere/Case) or SAE (CAT)
  • 34,000# Excavator
  • Rubber Tracks
  • Two modes of control available: ISO (Deere/Case) or SAE (CAT)
  • 24, 36, 48" buckets available




Attachments

32-9132-93
  • Post hole auger
  • 6, 9, 12, 18, 24, 30, 36" bits available
  • Hydraulic breaker










Mini-Excavators

32-7532-7632-7732-78
  • Mini-Excavators
  • 2000, 4000, 6000, 9000# models available
  • All models have rubber tracks
  • Two modes of control available: ISO (Deere/Case) or SAE (CAT)

Attachments

31-2K
  • Mini-Excavator Bucket
  • 12", 18", 24" models available